10
English
FILLING WATER TANK
Before initial use, you must soak the Mineral Cartridge in water for 24
hours. You may use a separate container or Water Tank to do so. If Tank is
used, empty water and refill with fresh water prior to use.
Note:
The unit may take several minutes to create mist with the initial use
of a new Mineral Cartridge.
1.
Unplug humidifier and place on level surface, such as floor.
Note:
Spills can occur during cleaning, moving or refilling Water Tank, so
be careful to avoid spills when doing these activities.
2.
Remove Water Tank by grasping recessed handle and pulling toward
you (A).
3.
Turn Water Tank upside down and remove Cap (B).
4.
Fill Water Tank with cool tap water (C).
5.
Ensure Gasket (rubber ring around Cap) is properly positioned and
replace Cap. Some downward pressure may be needed to compress
Gasket prior to rotating Cap 1/4 turn clockwise.
6.
Lower Water Tank into Base, positioning Water Tank over raised bump in
Base (D). Once in nested position, water outlet valve inside Cap opens,
releasing water into Base.
Note:
The rate of water dispensing from Water Tank into Base is controlled
by the Mineral Cartridge. The unit may take several minutes to fill the Base.
This humidifier has a 1-gallon capacity and 2-gallon output in 24 hours (if
set to High Fan Speed, Continuous Humidity setting).
C
A
B
D
