11
English
REPLACING WICK
1.
Turn humidifier Off and unplug.
2.
Remove Water Tanks and Air Outlet Grille by lifting up.
3.
Remove and discard used Wicks.
4.
Install new genuine Vornado Wicks by slightly bending the Wicks to
match curve of unit. Make sure Wicks fit flush against bottom and side
of humidifier.
5.
Replace Water Tanks and Air
Outlet Grille.
Wicks contain an antimicrobial
preservative. Protection is limited
to the product. Wash hands
and avoid touching eyes after
handling wick.
AUTOMATIC REFILL PROGRAM
Select the shipment interval and Vornado will send replacement
Wicks automatically. Eliminate the hassle of remembering to
reorder. Maintain the high efficiency of your Vornado humidifier.
To sign up,
visit vornado.com, email
[email protected] or call
1-800-234-0604. Cancel anytime.
REPLACING WICK
Part #
MD1-0034
While your humidifier came equipped with a Wick, you will eventually have to replace it, as they last approximately 4–8 weeks, depending on use.
Many
factors affect the life of the Wicks, including amount of use, water hardness and outside environmental factors.
You will know the Wick needs to be
replaced when it becomes hard and is no longer absorbing the water effectively. Replace the Wick with a genuine Vornado
®
Wick. While other brands
may fit our units, these wicks do not carry the same quality and life as our own and may diminish the humidifier’s performance.
The additional sodium in chemically softened water may cause Wicks
to harden. Try using untreated or tap water. Hard water or water with
excessive minerals, such as lime or iron, may shorten Wick life. Try
Bacteriostat or Water Treatment found at most hardware or home
specialty stores.
On first use, the Wick may give off a mild odor. The odor is not harmful
and will go away after the first few hours of operation. If the odor is
exceptionally strong, you can help eliminate most or all of it by soaking
the Wick in a solution of 2 teaspoons of white vinegar and one gallon
of water for 20–30 minutes. Rinse thoroughly in cool water. Allow excess
water to run off and dry before replacing in the Base. DO NOT wring.
Содержание EVDC505
Страница 1: ......
