10
English
1.
Position humidifier to not blow directly on objects or plants. Plug
power cord into standard grounded wall outlet.
2.
To turn humidifier on touch
. The
humidifier will default to LOW fan speed
and 50% humidity. Set humidity level by
touching -/+ until the desired humidification
level appears on the display. If Continuous
is selected, CO will appear on the display
and the humidifier will run continuously.
3.
Touch
to select Turbo (HH), High (HI) or
Low (LO) fan speed. The
will illuminate
blue. The selection will flash for five
seconds, then set and return to selected
humidity level.
4.
You may also select Energy Smart™
mode and ES will flash on the display for
five seconds, then set before returning to
the selected humidity level. The will
illuminate green. In Energy Smart™ mode,
Continuous (CO) and Turbo (HH) fan speed
are disabled.
Note:
The LED Display dims after 20 seconds of inactivity.
5.
Once settings are changed from first use default, they are saved
when powering humidifier off.
6.
If unit is unplugged, during next use, settings will default to LOW fan
speed, 50% humidity.
WARNING:
Avoid finger contact with the fan blade, which is accessible
on the underside of the Power Head. Before dissasembly or removing
the Power Head from the humidifier, wait until the fan blade comes to a
complete stop.
HOW TO USE
TURBO (HH)
Operation for fast humidification of larger rooms. Turbo-speed
operation will evaporate 3 gallons of water (+/- 10%) in 24 hours of
continuous operation. This assumes room conditions of 70°F and
30% relative humidity.
HIGH (HI)
Operation for moderate humidification of mid-size to large rooms.
LOW (LO)
Operation for quiet, nighttime use or smaller rooms. On
Low operation, your humidifier may run without refilling for
extended periods.
HUMIDITY – 40%–60%
The humidifier will operate until the desired humidity level is
reached. At this point, the Fan will turn off. If the Fan does not
turn on, the humidity setting may be lower than the room humidity
level. Increase the humidity set point until the Fan turns on. This is
an indication of the level of humidity already in the room.
