Vornado ELEMENT S, Быстрый старт

Страница: 20 / 28

19
English
CLEANING THE BASE
1.
Turn humidifier off and unplug.
Note:
Be sure you are near a sink or an area that will not be damaged by water. Excess water will flush
from heat element cover when disassembling.
2.
Disassemble humidifier:
–
Remove water tank first.
–
Remove power head by pushing in on the tab and
lifting up. The tab is located on the right side of
the housing where it meets the base.
–
Remove all silicone parts.
WARNING: Do not
grasp outlet grill while removing power head,
it may be hot.
3.
Clean base and silicone parts with warm water and a
mild detergent. Rinse and dry.
4.
Reassemble humidifier:
–
Ensure the silicone parts are back in place.
WARNING: Do not run humidifier without the silicone parts.
–
Position power head so it is aligned with the base. Insert the tab into the slot in the base until it
latches.
–
Replace water tank and resume operation.
Tab