English
11
HOW TO REPLACE YOUR FILTERS
1.
Turn off and unplug unit.
2.
Turn over the unit and remove Leg Stand. Remove the Filter Frame
by twisting the Filter Frame Support Tabs to the open position.
TAB
TAB
TAB
GENUINE VORNADO FILTERS ARE RECOMMENDED
Peak performance is only realized when genuine Vornado Carbon
and HEPA filters are used. Others may claim to be compatible with
Vornado units, but the Vornado Air Purifier is calibrated to achieve a
99.97% capture rate of particles 0.3 microns or larger, only when used
with Vornado Filters.
3.
Remove and discard used Filters. Simply take hold of the Pre-Filter
at any place along the perimeter and remove. To remove the Filter
Cartridge, pull upward on side tabs until filter is removed.
Note:
Clean any remaining dust or hair inside the unit by using a
vacuum hose. Do Not use water or liquids to clean the unit.
FILTER REPLACEMENT
4.
Replace with genuine Vornado Filters. Place the Filter Cartridge
in the unit and gently press around the perimeter to ensure place-
ment. Carbon side of cartridge will go into the unit first so tabs on
Hepa are facing up. Place Pre-Filter on top of Hepa.
5.
Place Filter Frame on top of Carbon and twist Filter Frame Support
tabs into the locking position. Replace Leg Stand.
6.
Turn unit right-side up.
7.
To reset the Filter Replacement Indicator, press and hold
for
approximately 3 seconds until Filter Replacement light has turned off.
Note:
Do not operate the Air Purifier without a Vornado 3-in-1 Filter
Cartridge.
