Vordon HT-869V2, Руководство по установке

Страница: 4 / 24

Click “ ” on the main menu, enter setting menu, click corresponding option to enter
corresponding option setting, also can drop up and down to find the option.
Setting
Setting interface 1 Setting interface 2
Wallpaper setting interface
Click wallpaper option enter to wallpaper
setting interface, as below:
User can hold the picture and drop the
favorite picture as wallpaper.
In order to meet your higher demand, unit
support set up your images as the
background.
Custom the images as background must
meet the following conditions, the image
width is between 800-1000 pixels and the height must be 480 pixels, the format of image
must be JPG.
And the image must be stored in the SD card root directory.
Click “customized”enter custom background interface, system will automatically search for
the qualifying picture in SD card, click “Update” to set the current selected picture as
background.
1) Wallpaper setting
Note: For better effect, please make the required size of image in the computer, after saving in the
SD card, then operate above steps.
1. Beep Button:
Click to turn on or turn off Beep button.
2. Mute when reverse:
Click to choose mute when reverse the car.
For your safety, we recommend you to choose
mute.
3. Virtual Disc
Set up the virtual disc recording storage
devices, select USB or SD card.
4. Satellite Signal:
Click this function can check the DVD's satellite receiving state.
5. Restore Factory Settings:
Click the Restore Factory Settings option, confirm to restart the unit. After restoring to
factory state, your previous setting will be cleared.
6. Touch Calibration
Click touch calibration, enter touch calibration menu, use the point of pen to click
corresponding five “+” to finish touch calibration.
Note: If can not enter touch calibration menu when with large deviations, you can long time press
NAVI or GPS button on the panel for 4 seconds to enter touch calibration menu.
3) Common setting
Common setting interface
Boot logo setting
Click “ ” icon during setting menu , input
the password 8888 to enter LOGO setting to
set up the LOGO.
Click left and right to turn page, select your
favorite boot interface (logo / image), click
“Update”to select image as boot interface.
2) Boot logo setting
6 5