VOOK
premium DVR
31
Digital Video Recorder User Manual
Step1: enter into system configuration
Æ
alarm configuration
Æ
motion; refer to Fig 4-23:
Step2: enable motion alarm, set alarm hold time which
means time interval between two adjacent detective
motions. If there is other motion detected during the
interval period which is considered continuous
movement; otherwise, it will be considered that those
two adjacent detective motions are two different motion
events. Click Trigger button, a dialog box will pop-up:
Step3: the setup steps of motion trigger are familiar with
alarm handling; user can refer to Chapter 4.5.1 Sensor
Æ
alarm handling for more details.
Fig 4-23 alarm configuration-motion
Step4: click Area button, a dialog box will pop-up as Fig 4-24:
Fig 4-24 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value
is the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click
icon, set the whole area as detection area; click
icon, the set detection area
will be cleared; click
icon, user can test whether the sensitivity value and motion area are suitable accordingly
（
refer to
following picture
）
; Click
icon, to save the setting; click
icon, exit current interface.
