1.
MIDI OUT.
Echoes commands from MIDI IN for chaining devices.
2.
MIDI IN.
Receives MIDI commands and provides phantom power for Voodoo
Lab Ground Control Pro foot controller.
3.
Power jack.
Requires 9-12VDC or 9VAC at 100mA.
4.
Control Jacks (4).
Access to individual switch functions with 1/4” mono
jacks.
5.
MULTI connector.
Access to all 4 switch functions from a single connector.
6.
Power LED.
Indicates Control Switcher is powered on.
7.
Buttons / Status lights.
Buttons toggle switch functions on/off. Buttons light
up to indicate status. Also used to save programs and setup.
Switches
Control Switcher includes four automated switches which are used to replace
your amp’s footswitch. The switches can be accessed individually from the four
1/4” mono CONTROL jacks, or combined using the MULTI connector.
The MULTI connector provides access to all four switches with a common
ground. This is a standard 5-pin DIN connector which is commonly used for MIDI.
Plugging into any
1/4” jack isolates and removes that switch from the MULTI
connector.
MULTI Connector
Tip: If you want to make your own amp control cable using the MULTI connector,
start with a 5-pin active MIDI cable, cut off and replace the connector from one
end.
Please contact Voodoo Lab or refer to our web site to purchase a ready made
interface cable for many common amps.
