A5P | 01
OPERATION - WITH WARMING PANS
Connect the Buffet Warmer to a suitable mains socket. Ensure the TEMPERATURE REGULATOR is set to the
‘OFF’ position before connecting.
CAUTION: If the TEMPERATURE REGULATOR is not set to the ‘OFF’ position when connected, it may cause
the appliance to overheat or possibly fail to operate.
Switch on the appliance by turning the TEMPERATURE REGULATOR to the required temperature. The
INDICATOR LIGHT will illuminate red to indicate that the appliance is heating up.
Once the set temperature has been reached, the INDICATOR LIGHT will extinguish.
Add your cooked, pre-prepared ingredients to the WARMING PANS. Distribute the ingredients evenly to
ensure all contents are warmed through.
WARNING! Only add ingredients to the Buffet Warmer using wooden or silicone cooking tongues (not
supplied) to avoid contact with the hot surface of the WARMING PANS.
IMPORTANT: All ingredients added must be thoroughly cooked before adding them to the WARMING PANS.
This appliance is designed to warm food only and is not intended to heat from chilled or frozen.
IMPORTANT: Ensure you have pre-prepared your food beforehand. Do not attempt to slice any ingredients
whilst in the WARMING PANS as this will damage and scratch the surface.
Position the LIDS on top of the WARMING PANS and ensure they are secure.
NOTE: The INDICATOR LIGHT will cycle on and off during operation. This is completely normal as the
appliance maintains the set temperature.
IMPORTANT: We recommend that you do not operate this appliance for more than
8 hours
at a time.
After use, turn the TEMPERATURE REGULATOR to the ‘OFF’ position and disconnect from the mains. Allow
the WARMING PANS and PAN FRAME to cool completely before removing from the WARMING PLATE.
CAUTION: The Buffet Warmer will remain warm for some time after disconnecting from the mains.
Discard any remaining ingredients and wipe the WARMING PANS with a paper towel to remove any grease or
oils before cleaning.
Содержание 2000161
Страница 7: ...A5P 01...