BEFORE FIRST USE
Before using this appliance for the first time, please ensure you complete the following
steps:
•
Position NON-SLIP COASTER and the
CHOPPING BOWL on a dry, level and heat-
resistant surface.
•
Carefully unpack the Mini Chopper and all parts.
Remove all packaging materials, including any
stickers or labels.
•
Clean the CHOPPING BOWL,LID and SILICONE
RING with a damp cloth or sponge. Wipe dry
with a soft dry cloth.
•
Carefully holding both the PRIMARY
BLADE and SECONDARY BLADE, slide the
SECONDARY BLADE over the PRIMARY
BLADE.
BLADE ASSEMBLY
WARNING! Do not remove the BLADE
SHEATH until fully assembled.
9
10
•
The secondary blade column should sit flush
the column of the primary blade.
•
Once both blades sit flush with each other,
rotating the secondary blade clockwise will
lock both blades together.
IMPORTANT! To confirm the blades are in
correct position, the twin marking lines on
each blade column should align together
once locked into their correct position (as
shown adjacent) and should not be offset
each other.
4
WARNING! Never immerse the MOTOR
UNIT or cord in water or any other liquid.
