EN
7
WWW.VONROC.COM
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions.
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate label.
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dangerous
to insert the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm
2
. When using a cable reel
always unwind the reel completely.
2. MACHINE INFORMATION
Intended use
The bench grinder is a combination tool for the
grinding and polishing of metals, plastics and other
materials using the appropriate grinding wheels.
The flexible shaft is intended to function as a grin-
der, sander, wire brush, polisher, carving or cut-off
tool. This rotary multi tool is great for editing of
materials like wood, plastic, stone, shell aluminium,
brass and steel. Always use the proper accessories
and speed setting.
TECHNICAL SPECIFICATIONS
Model No.
BG501AC/S_BG501AC
Voltage
220 - 240V
Frequency
50 Hz
Power input
120W S1, 150W S2 5min
Rotational speed, not loaded
0-9900 /min
Grinding wheel dimensions
Ø 75x20 mm
Spindle hole diameter
Ø 10 mm
Class
II
Weight
2.24 kg
Lpa (Sound pressure level)
82.8+3 dB(A)
Lwa (Acoustic power)
95.8+3 db(A)
Load factor
A load factor of S2 = 5 min (intermittent periodic
duty) means that you may operate the motor con-
tinuously at its nominal power level for no longer
than the time stipulated on the specifications
label (5 minutes ON period). If you fail to observe
this time limit the motor will overheat. During the
OFF period the motor will cool again to its starting
temperature.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
- Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
- The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. On/Off switch
2. Spark guard
3. Spark guard bracket
4. Safety guard
5. Grinding wheel
6. Polishing wheel
7. Tool rest adjustment knob
8. Tool rest
9. Mounting holes
10. Spark guard adjusting screw
11. Speed adjustment knob
12. Flexible shaft
13. Locking pin
14. Wrench