VonHaus 3515389, Инструкция по эксплуатации

Страница: 5 / 16

WARNING
Please read these instructions carefully and keep for future reference
IMPORTANT SAFETY INFORMATION
FOR USE.
WARNING!
Know your 9A Electric
Tacker. Do not plug the tool into the
power source until you have read and
understand the information in this
manual. Learn the tool’s applications
and limitations, as well as the specific
potential hazards related to the tool, to
reduce the risk of electric shock, fire or
serious injury.
Use the power tool, accessories and
tools bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Only use accessories designed for use
with the tool.
Secure the workpiece. Use clamps or a
vice to hold the workpiece as this is safer
than using your hand and frees both
hands to operate the tool.
Do not use the power tool if the switch
does not turn it on and off. A power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Do not force the power tool. Always
use the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
Do not overreach. Keep proper footing
and balance at all times. This will enable
better control of the power tool in
unexpected situations.
Disconnect the plug from the power
source and/or the battery and remove
the nails/staples from the power tool
before making any adjustments, changing
accessories or storing. Such preventative
safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the tool. Power
tools are dangerous in the hands of
untrained users.
Maintain the power tool. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.