VonHaus 3515387 Скачать руководство пользователя страница 4

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

1

INTENDED USE.

Only use the Paint Station as described in 
this instruction manual.
This Paint Station it is not suitable for 
industrial or commercial use.
The use of any accessory or attachment 
or performance of any operation with this 
product other than those recommended 
in this instruction manual may present a 
risk of personal injury and/or damage to 
property. 
This Paint Station is not intended for 
use by persons with reduced physical, 
sensory or mental capabilities, or lack 
of experience and knowledge, unless 
they have been given supervision or 
instructions concerning use of the 
product by a person responsible for their 
safety.
Children should be supervised to ensure 
they do not play with the product.

GENERAL SAFETY INFORMATION.

WARNING!

 Read all safety warnings 

and all instructions. Failure to follow the 
warnings and instructions may result in 
electric shock, fire and/or serious injury.
Please retain all warnings and instructions 
for future reference.

ELECTRICAL SAFETY.

Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. There 
is an increased risk of electric shock if 
your body is earthed or grounded.
Do not expose the product to rain or wet 
conditions. Water entering the product 
will increase the risk of electric shock.

WORK AREA SAFETY.

Keep your work area clean and well lit. 
Cluttered or dark areas invite accidents.
Do not operate in explosive atmospheres 

such as in the presence of flammable 
liquids, gases or dust.
Keep bystanders, children and animals 
away while operating the product. 
Distractions can cause you to lose control.

BEFORE USE.

WARNING!

 Know your Paint Station. 

Do not plug the product into the 
power source until you have read and 
understood the information in this 
manual. Learn the product’s applications 
and limitations, as well as the specific 
potential hazards related to this product, 
in order to reduce the risk of electric 
shock, fire or serious injury. 

WARNING!

 If any part is missing or 

damaged, do not plug into the power 
source or install any accessory until the 
missing or damaged part is repaired or 
replaced. Failure to follow this instruction 
could result in serious personal injury.
Do not use while you are tired or under 
the influence of drugs, alcohol or 
medication. A moment of inattention 
while operating  may result in injury.
Use only paints, solvents or other 
materials with a flash point of 39°c or 
higher. 
The materials used with this Paint 
Station (paint, thinners, etc.) may contain 
hazardous, harmful, explosive or corrosive 
materials.
Always ensure there is adequate 
ventilation when spraying.

NEVER

 spray near an open flame, 

including an appliance pilot flame.

NEVER

 smoke near the Paint Station, 

paint or other flammable objects.
Always disconnect the unit from the 
electrical outlet when cleaning the Paint 
Station.
Always ensure the spray area is safe and 
free from all debris that may present a fire 

Содержание 3515387

















Отзывы: