ABOUT THE CHARGER
LED/CONTROLS
The 3.5A Battery Charger is designed for charging all types of 12V lead-acid and 12V
lithium-ion batteries, including WET (Flooded), GEL, MF (Maintenance-Free), EFB
(Enhanced Flooded Battery), AGM (Absorbed Glass Mat) batteries.
It is suitable for charging battery capacities from 2 to 120Amp-Hours and maintaining all
battery sizes.
Built-in intelligent microprocessor makes charging faster, easier and safer.
This charger has safety features, including spark proof, protection for reverse polarity,
short circuit, over current, overcharge and overheat.
It has auto-memory, which returns to last selected mode when restarted (except Standby
and Supply Modes).
When battery level indicator turns to CHARGED solid Green LED, it will automatically
switches from full charge to maintenance status to maintain batteries during prolonged
periods of storage without overcharging or damaging the battery.
The 3.5A Battery Charger has four external holes for mounting. Mount the charger in
a desired location with equipped self-drill screws. It is important to keep in mind the
distance to the battery. The DC cable length from the charger, with either the battery
clamp or ring terminal, is approximately 75 inches (1900mm).
Need repair or replacement if any protective AC and DC cable insulation, charging
clamps, DC fuse holders have been damaged.
Any repair must be carried out by a qualified service agent in order to avoid danger.
The use of an extension cord is not recommended.
Switch between 12V/Repair or 6V
Jump Charge
Battery Temperature is
too low.
Battery Temperature is
too high
Battery Charging
Battery Charged
Error Indicator
Power Indictor
WARNING
