VonHaus 3009005, Инструкция по эксплуатации

Страница: 3 / 12

WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
Do not use the Mirrored Cabinet for any purpose other than that for which it is designed.
This product is not a toy. Children should be supervised to ensure they do not play with the product.
CAUTION: CAUTION: The assembly pack contains small parts which pose a choking hazard to children and pets. Keep
children and pets clear at all times during assembly.
This Mirrored Cabinet is water resistant but not waterproof any prolonged contact with water can cause the
wood to warp or damage the finish.
CAUTION:
CAUTION: Do not place hot drinks directly onto the furniture.
WARNING!
WARNING! Never stand on, or rest on the product as this can cause damage or injury.
Do not overload the product as this may result in damage to the product or personal injury.
Do not exceed maximum weight capacity of 5kg .
Do not clean the product with any abrasive chemicals, solvents and detergents as this can damage the surface.
Periodically check the fittings and secure as necessary (every 3 months or as required). Re-tighten the fittings 1
week after first assembly.
Take care not to over tighten any fixings as this could damage the product.
Always assemble near to the area to be installed/placed.
Ensure you have sufficient space to assemble the product.
CAUTION: Do not use any power tools to assemble the product as this could cause damage to fixings and
panels.
WALL MOUNTING
Due to the great variety of wall construction no fixings are supplied with this product.
Please assess the wall where the Cabinet is to be mounted and purchase the necessary fixings suitable, if any
doubt please seek expert advise from your local DIY store.
Ensure the supporting surface will safely support the combined weight of the equipment and all hardware and
supporting components before installation. If unsure, contact a qualified contractor for guidance.
1. Ensure the wall is clean.
2. Mark the desired position with a pencil, use a spirit level if required, to ensure it is level.
3. Use the correct drill bit for the type of wall (ensure you do not drill into electrical cables/water pipes).
4. Once the hole has been drilled, insert the correct fixing. If fixing to ceramic tiles.
Ensure the wall plugs, are pushed in beyond the depth of the tiles.
TOOLS REQUIRED: TOOLS REQUIRED: (NOT SUPPLIED).