VonHaus 2522011, Инструкция по эксплуатации

Страница: 7 / 10

BULB SPECIFICATION
CAUTION: Ensure the plug is disconnected from
the mains before changing the bulbs.
1.
To gain access to the bulbs, remove the 4 screws
(circled) and detach the grill from the front of the
Heater Head
(I).
CHANGING THE BULBS
1
3
2
4
2.
Remove the metal plate surrounding the end of
the bulbs as shown. The use of a flathead screwdriver
may be needed to open up the small metal tab on the
top. Repeat for the other end.
3. Slide the rubber caps off the bulb connectors and
press the small tab (circled) to disconnect from the
bulbs. Repeat for the other end.
IMPORTANT: Ensure all connectors are correctly
removed before attempting to remove a bulb.
Twisting or bending may result in a bulb shattering
and cause injury to the user.
4. Carefully remove the bulbs and replace with the
correct quartz bulbs.
WARNING!
Do not touch the bulbs with your bare
hands. Handle using the plastic connectors either end
or wear protective gloves.
Bulb type:
Quartz Infrared Tube
Dimensions: Diameter: 10mm, Length: 378mm
Connections:
6.3mm male spade connectors