VonHaus 2514060, Инструкция по эксплуатации

Страница: 8 / 12

OPERATION
CAUTION: Before using the Radiator, make sure that
it is on a flat and stable surface. Damage may occur if
it is placed on an incline or decline.
NOTE: When the Heater is switched on you will hear
a crackling/popping sound, this is completely normal
and not a fault , it is the oil settling.
Set all the controls to the off position and insert the
plug into a socket outlet, ensuring the plug fits firmly.
Rotate the Temperature Dial clockwise to the MAX
position and switch the Radiator on.
Once your room reaches the desired temperature,
slowly rotate the Thermostat Knob anticlockwise
until the pilot light goes out. It can now be left
at this setting. As soon as the room temperature
has dropped below the set temperature, the unit
will switch itself on automatically until the set
temperature has been reached again. In this way, the
room temperature remains constant with the most
economical use of electricity.
If you want to change the room temperature setting,
rotate the Thermostat Knob clockwise to raise the
temperature, or anticlockwise to lower it.
This Radiator is fitted with an overheat protection
system that shuts off the Radiator should parts of the
Radiator become excessively hot.
To completely shut the Radiator off, turn all the
controls to the off position and remove plug from the
socket outlet.
CONTROLS
LOW HEAT MEDIUM HEAT HIGH HEAT
7