VonHaus 15/007, Инструкция по эксплуатации

Страница: 8 / 16

FITTING THE STABILISER BAR
Tools required
WARNING! The Stabiliser Bar must be fitted before use.
NOTE: Stabilising Bar is only supplied with 15/007.
Flip the Telescopic Ladder vertically so
that the feet are accessible. You will
notice plastic pins in the slot on each
foot. In order to fit the Stabiliser Bar
(8),
these pins will need to be snapped.
This can be done easily using a flathead
screwdriver.
Once the pins have been snapped and
removed, the Stabiliser Bar will fit into the
slots. You will need to line up the holes on the
Stabiliser Bar with the holes on the legs of the
Telescopic Ladder.
NOTE:
You may need a rubber mallet to
carefully tap the Stabiliser Bar into the slots
securely.
With the Stabiliser Bar slotted onto the
feet of the Ladder, secure into place
using the 2 bolts provided. Tighten the
bolts with a wrench to secure.
1 2
3
5