VONETS
——
VRP300-PLUS
300M
WiFi Repeater/Bridge
5
automatically, if connection is successfully, green LED light will quick flash;
Remark 1:
①
VRP300-PLUS is not configured connect to any hotspot, hotspot
connection status light (Green Light) will quick flash;
②
VRP300-PLUS is connected successfully, hotspot connection status light
(Green Light) will quick flash;
③
VRP300-PLUS is connected failed, hotspot connection status light (Green
Light) will slow flash.
2. AP Mode
In AP mode, there is no need any configuration, wireless connection to the VRP300-PLUS
hotspot can be networked (For connection method, please refer to “Rbridge mode”
setting)
Remark 2: When VRP300-PLUS is connected to external network, its IP address will be
changed. At this time, if you need to login configured page, we suggest you to login :
http://vonets.cfg . Or in the Windows command line window, enter command: ping
vonets.cfg, to obtain the device IP, then login the page by this IP.
III. Revise WiFi name and WiFi password:
1)The network device connects to the VRP300-PLUS and enters the configuration page (For
connection method, please refer to “Rbridge mode” setting);
2)Revise WiFi name: Jump to “WiFi Repeater”----”Basic Settings”, enter new WiFi name in
“WiFi Repeater (SSID)”, click “Apply”;
