3
2
Description
The greenhouse is intended to create a favorable microclimate for growing garden
crops in allotments and kitchen gardens.
The greenhouse is available in different lengths depending on the buyer’s choice.
The required length of the greenhouse is attained by buying additional packages with
extension inserts. Each insert lengthens the standard supply set of the greenhouse
by 2 m. The length of the standard supply set is 4 m. The height of the installed frame
of the greenhouse is 2.1 m.
The frame of the greenhouse is made of galvanized steel pipes and profiles. It is
assembled with screws and nuts. The kit comprises everything needed for fixing the
glazing. The complete set of the greenhouse includes the glazing at the request of
the buyer. The standard supply set requires 3 sheets of 2.1х6 m polycarbonate 4 mm
thick. For each insert there is one 2.1х6 m polycarbonate sheet.
Perform assembling and operation of the greenhouse in strict accordance with
the manual and operating rules stated in the technical certificate. Please keep
this technical certificate for further reference.
!
Operation rules
Before starting the operation, the greenhouse should be assembled and installed
according to the instruction. When installing the greenhouse by third parties, the
buyer should check the assembly quality for compliance with the instruction.
Do not install the greenhouse close to buildings and trees from which snow or ice
may fall. The distance of at least 2 m is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s.
The maximum snow load for the framework occurs when the weight of a snow cover
is 160 kg per 1 m
2
of the horizontal surface of the ground.
It is necessary to avoid exceeding the snow load on the greenhouse: either to
remove snow from the greenhouse after each snowfall, or remove the greenhouse
glazing for winter, or install the sliding panels over all spans of the frame and shift
them to the lower position for winter.
Warranty liabilities
1. The manufacturer is responsible for the completeness of the product.
2. The manufacturer is responsible for assemblability of the greenhouse in accordance with
the instructions.
3. The manufacturer is responsible for the greenhouse durability in the specified weather
conditions.
4. Term for making claims is 24 months from the day of purchase
Terms of warranty provisions
Cleaning and washing sheets of polycarbonate
Warranty does not apply to cases of:
1. Greenhouse installation in violation of instruction requirements
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and
warm water, using a soft rag or a sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning
polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of the
cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets with
brushes, metallic cloth or other abrasive materials.
When disinfecting the greenhouse from pathogens causing fungal and bacterial
diseases, do not use «sulfur blocks» to avoid frame corrosion (blackening).
Manufacturing facility: LLC “Volya”
141983, Dubna, Moscow region, Severnyi per., 8.
The manufacturer is responsible for the quality of products in accordance with the RF Civil Code.
The company reserves the right to make changes in the greenhouse design
Production date
Technical certificate/GREENHOUSE «SIGMA EURO»
Technical certificate/GREENHOUSE «SIGMA EURO»
