Volvo XC90 Twin Engine 2019, Руководство пользователя

Страница: 659 / 700

MAINTENANCE AND SERVICE
657
1. Apply a piece of masking tape over the dam-
aged surface. Then remove the tape to
remove any loose paint.
If the damage is down to the metal, use of a
primer is appropriate. In the event of damage
to a plastic surface, an adhesive primer
should be used to give better results - spray
into the lid of the spray can and brush on
thinly.
2. Before painting, gentle polishing using a very
fine polishing agent may be carried out
locally if required (e.g. if there are any uneven
edges). The surface is cleaned thoroughly
and left to dry.
3. Stir the primer well and apply using a fine
brush, a matchstick or similar. Finish off with
a basecoat and clearcoat once the primer
has dried.
For scratches, implement the same procedure
but mask around the damaged area to protect
the undamaged paintwork.
Touch-up pens and spray paints for touching up
paintwork are available from Volvo dealers.
NOTE
If the stone chip has not penetrated down to
the meal and an undamaged layer of paint
remains in place, fill in with base coat and
clear coat as soon as the surface has been
cleaned.
Related information
•
Car paintwork (p. 656)
•
Colour codes (p. 657)
Colour codes
Colour code
The colour code label is located on the car's
right-hand rear door pillar and becomes visible
when the right-hand rear door is opened.
Exterior colour code
Any secondary exterior colour code
It is important that the correct colour is used.
Related information
•
Car paintwork (p. 656)
•
Touching up minor paintwork damage
(p. 656)