Volvo XC90 T8 TwinEngine Plug-In Hybrid, Руководство пользователя

Страница: 109 / 534

INSTRUMENTS AND CONTROLS
107
For the power windows to function, the ignition
must be in at least mode
I
. When the vehicle has
been running, the power windows can be oper-
ated for several minutes after the ignition has
been switched off, or until a door has been
opened.
NOTE
•
Movement of the windows will stop if they
are obstructed in any way. If this happens
twice in succession, the automatic func-
tion will not work for several minutes and
the window can be closed by holding the
button up.
•
To reduce buffeting wind noise if the rear
windows are opened, also open the front
windows slightly.
Manual up/down
–
Move one of the controls up/down slightly.
> The power windows move up/down as
long as the control is held in position.
Auto up/down
–
Move one of the controls up/down as far as
possible and release it.
> The window will open or close completely.
Resetting
If the battery has been disconnected, the auto
open function must be reset so that it will work
properly
1. Gently raise the front section of the button to
close the window and hold it for one second.
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
Related information
•
Child safety locks (p. 222)
Rearview mirror
The interior rearview mirror has an auto-dim
function that helps reduce glare from following
vehicle's headlights.
Auto-dim function
The interior rearview mirror’s auto-dim function is
controlled by two sensors: one pointing forward
(located on the forward-facing side of the mirror,
which monitors the amount of ambient light) and
one pointing rearward (located on the side of the
mirror facing the driver at the upper edge, which
senses the strength of following vehicles' head-
lights), and work together to help eliminate glare.
NOTE
Obstructing the forward sensor with e.g.,
parking stickers, transponders, etc., or the rear
sensor by loading the cargo area or the rear
seat in such a way that light is prevented from
reaching the sensor will reduce the auto-dim
function in the interior rearview mirror and
optional auto-dim function in the door mirrors.
Related information
•
Adjusting the power door mirrors (p. 102)