Volvo XC90 2012, Руководство пользователя

Страница: 290 / 310

11 Specifications
Fuel
11
288
el's basic version, then resistance increa-
ses.
•
High speed results in increased wind resis-
tance.
•
Fuel quality, road and traffic conditions,
weather and the condition of the car.
Even a combination of the above-mentioned
examples can result in significantly improved
consumption. For further information, please
refer to the regulations referred to
1
.
Large deviations in fuel consumption may arise
in a comparison with the EU driving cycles
1
which are used in the certification of the car
and on which the consumption figures in the
table are based.
To bear in mind
Tips that the driver can use in order to reduce
consumption:
•
Drive gently and avoid unnecessary accel-
eration as well as braking too hard.
•
Drive with the correct air pressure in the
tyres and check this regularly - select ECO
tyre pressure for best results, see the tyre
pressure table on page 289.
•
Choice of tyres can affect fuel consump-
tion - seek advice on suitable tyres from a
dealer.
See further information and more advice on
pages 13 and 134.
See page 139 for general information on fuel.
1 Official fuel consumption figures are based on two standardised driving cycles in a laboratory environment ("EU driving cycles") all in accordance with EU Directive 80/1268/EEC (Euro 4), EU Regulation
no 692/2008 (Euro 5) and UN ECE Regulation no 101. The regulations cover the driving cycles for city driving and driving on main roads. - City driving - the measurement starts with cold starting
the engine. The driving is simulated. - Driving on main roads - the car is accelerated and braked at speeds between 0-120 km/h. The driving is simulated. The value for combined driving, which is
reported in the table, is a combination of city driving and driving on main roads, in accordance with legal requirements. CO
2
emissions - the exhaust gases are collected in order to calculate the
carbon dioxide emissions during the two driving cycles. These are then analysed and give the value for CO
2
emissions.