Volvo XC70 2011, Руководство пользователя

Страница: 79 / 316

03 Your driving environment
Ignition modes
03
``
*
Option/accessory, for more information, see Introduction.
79
Inserting and removing the remote key
Ignition slot with remote key and
START/STOP
ENGINE
button.
Inserting the remote key
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustration.
CAUTION
Foreign objects in the ignition slot can
impair function or damage the lock.
Removing the remote key
The remote key can be removed from the igni-
tion slot by pressing the key in lightly. It will
then be ejected slightly and can be removed
from the slot. The gear selector must be in
position
P (Park) .
Ignition modes
The various ignition modes are accessed with
the remote key in the ignition slot.
Posi-
tion
Function
0 Odometer, clock and tempera-
ture gauge are illuminated. Steer-
ing lock is deactivated. The audio
system can be used.
I
Moonroof*, power windows,12-
volt sockets, navigation system*,
climate system blower, ECC,
windshield wipers can be used.
II The headlights come on. Warn-
ing/indicator lights come on for
5 seconds. All equipment oper-
ates apart from heated seats and
rear window defroster, which
only work when the engine is run-
ning.
III The starter motor will operate
until the engine has started.
NOTE
The brake pedal must not be depressed
when accessing ignition modes
I or II .
Ignition mode 0
Insert the remote key in the ignition slot and
press it lightly. It will be drawn into the slot.
WARNING
The ignition key should always be fully
inserted in the ignition slot when the vehicle
is being towed to help prevent the steering
wheel from locking.
On vehicles with the optional keyless drive,
the remote key must be in the passenger
compartment and the driver's door must be
closed.
Ignition mode I
Press the remote key into the ignition slot
and press
START/STOP ENGINE briefly.
Ignition mode II
Press the remote key into the ignition slot
and press
START/STOP ENGINE for
approximately 2 seconds.
Ignition mode III (engine start)
Start the engine, see page 107.
Stopping the engine
Press START/STOP ENGINE . (If the
engine is running and the vehicle is mov-
ing, keep the button depressed until the
engine stops).