Volvo VN, Руководство оператора

Страница: 212 / 456

OPERATION 203
• Check drive shaft.
• Exhaust system: secure, not leaking, not touching wires, fuel or air tubing.
• Frame and cross members: no bends, cracks or breaks.
DPF/SCR check hoses and fittings for leaks.
• Air tubing and electrical wiring: secured against snagging and chafing.
Step 5: Right Rear Vehicle Area
Dual Wheels, One or Two Axles
• Check condition of wheels and rims. Especially look for cracks, missing
lockrings, bent or broken spacers, studs, missing clamps or lug nuts.
• Check condition of tires: properly inflated, no serious cuts, bulges, tread
wear or any signs of misalignment; valve stems not touching wheels, rims or
brake drums; valve caps in place and no objects stuck between the wheels.
• Check that both tires are of same type, for example, not mixed radial and
bias type and that their circumferences are matched.
• Check wheel bearing and hub: no obvious leaking on outside or inside wheel.
Suspension
• Check condition of springs (leaf), spring hangers, shackles and U-bolts.
• Axle alignment.
Brakes
• Condition of brake drums. With brakes released, look for a noticeable gap
between lining and drum. (This check cannot be made if dust covers are
in place.)
• Condition of brake hoses: check for any chafing.
• Check brake chamber mounting bolts and brackets.
• Check slack adjusters and chamber push rod travel. With brakes applied
or released, look for conspicuously different positions of the slack adjusters
for proper adjustment.
• Check spring brakes.
Step 6: Rear of Vehicle Area
Frame Area
• Frame or cross members not bent, cracked or otherwise damaged or missing.