headlamP ContRol
A
Main beam flash
B
Main/dipped beam switching
and Home
safe light duration
Display and instrument lighting
Rear fog lamp, the light only illuminates
on the driver's side
Automatic
A
/deactivated dipped beam.
Main beam flash working but not fixed
main beam
Parking lamps
Dipped beam.
Switches off when the
engine is switched off.
Main beam
can be
activated
Opens petrol tank cap
Manual headlamp levelling (automatic for
Xenon lights*)
Unlocking of tailgate
Warning lamp, switching to dipped
beam, tunnel detection*, full beam
with automatic activation*
A
Certain markets.
key Positions
In order to reach the following key positions
without the engine starting: Do
not
depress
the brake pedal.
0
Unlock the car.
i
With the remote control key fully inserted
into the ignition switch: Briefly press
staRt/
stoP engine
.
ii
With the remote control key fully inserted
into the ignition switch: Press
staRt/stoP
engine
for approx. 2 seconds.
Key position
ii
consumes a lot of current from
the battery and should therefore be avoided!
See also the table in the section "
key posi-
tions
" in the normal owner's manual for the
car for information on the functions/systems
that can be used with the engine switched off
in different key positions.
To return to key position
0
from position
ii
and
i
:
Briefly press
staRt/stoP engine
.
Briefly press the button
– the engine stops.
Pull the remote control
key out from the igni-
tion switch.
The engine is switched
off when the figures in the
speedometer or tachom-
eter and side gauge
extinguish.
switCh off the engine and
Remove the key
