Volvo V 90 Cross Country, Руководство пользователя

Страница: 387 / 594

STARTING AND DRIVING
}}
385
Ignition positions
The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
In order to facilitate the use of a limited number
of functions with the engine switched off, the
car's electrical system can be set in 3 different
levels -
0 , I and II . These levels are described
with the denomination "ignition position"
throughout the owner's manual.
The following table shows the functions available
in each ignition position/level:
Level Functions
0
•
Odometer, clock and temperature
gauge are illuminated.
•
Power seats can be adjusted.
•
The power windows can be used.
•
The centre display is started and
can be used.
•
It is possible to start the audio.
The functions are time-controlled in
this ignition position and are switched
off automatically after a period of time.
I
•
Panorama roof, power windows,
12V socket in the passenger com-
partment, navigation, phone, venti-
lation fan and windscreen wipers
can be used.
•
Power seats can be adjusted.
•
12 V sockets in the cargo area
can be used.
•
The audio is started automatically
if it was running when the car was
left.
Power is taken from the battery in
this ignition position.
Level Functions
II
•
The headlamps come on.
•
Warning/indicator lamps illuminate
for 5 seconds.
•
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the car has
been started.
This ignition position consumes a
lot of current from the battery and
should therefore be avoided!
Selecting ignition position
Start knob in the tunnel console.
•
Ignition position 0 - Unlock the car and
store the remote control key inside the car.