Volvo V 90 Cross Country, Руководство пользователя, Страница: 281 / 594

DRIVER SUPPORT
}}
* Option/accessory. 279
Related information
•
Speed limiter
*
(p. 277)
•
Activating and starting the speed limiter
(p. 278)
•
Deactivating/reactivating the speed limiter
(p. 279)
•
Switching off the speed limiter (p. 280)
Deactivating/reactivating the speed
limiter
The speed limiter (Speed Limiter - SL) can be
temporarily deactivated so that it is set in the
standby mode and can be reactivated later.
NOTE: The illustration is schematic - details may vary
depending on car model.
Deactivate the speed limiter and set it
in standby mode
–
Press the steering wheel button (2).
> The speed limit markings and symbols in
the driver display change colour from
WHITE to GREY - the speed limiter is now
temporarily deactivated and the driver can
exceed the maximum speed setting.
Reactivating the speed limiter from
standby mode
–
Press the steering wheel button (1).
> The driver display's speed limit markings
change colour from GREY to WHITE - the
car's speed is then limited again by the
last stored maximum speed.
or
–
Press the steering wheel button (2).
> The speed limiter indicators and symbols
in the driver display change colour from
GREY to WHITE — the car will now apply
its current speed as the maximum speed.
Temporary increase in speed with the
accelerator pedal
The speed limiter can also be temporarily overrid-
den with the accelerator pedal without the speed
limiter being set in standby mode - e.g. to be able
to quickly accelerate the car out of a situation. In
which case, proceed as follows:
1. Fully depress the accelerator pedal and
release it so that acceleration is interrupted
when the desired speed has been reached.
> In this case, the speed limiter is still acti-
vated and the driver display's symbol is
therefore WHITE.
2. Fully release the accelerator pedal when the
temporary acceleration is finished.
> The car is then braked automatically
below the last stored maximum speed.