Volvo S90 - ACCESSORY PANEL, Дополнение к руководству пользователя

Страница: 122 / 166

PRACTICAL INFORMATION
120
Replacing front parking light bulbs
On models with halogen headlights, the front
parking light/Daytime Running Light bulb can be
replaced by the owner.
Before the bulb can be accessed, the headlight
housing's cover must be removed, see the article
"Replacing bulbs."
Remove the high beam bulb first by turning the
bulb holder upward and then pulling it straight
out. This makes it easier to access the parking
light bulb.
Driver's side bulb housing shown
1. Remove the rubber cover over the parking
light bulb.
2. Pull the bulb holder straight out.
3. Remove the bulb by pulling it straight out.
4. Insert a new bulb.
5. Insert the bulb holder in the socket and
press it into place.
6. If the high beam bulb was removed, insert
the bulb in the socket and turn downward.
7. Put the rubber cover back into position.
Related information
•
Replacing bulbs (p. 116)
•
Bulb specifications (p. 123)
Replacing front turn signal bulbs
On models with halogen headlights, the front
turn signal bulb can be replaced by the owner.
Before the bulb can be accessed, the headlight
housing's cover must be removed, see the article
"Replacing bulbs."
Driver's side headlight housing shown
1. Remove the rubber cover over the turn signal
bulb.
2. Press the retaining catches together and pull
the bulb holder straight out.
3. The bulb holder and bulb must be replaced
as one unit.
4. Press the new bulb holder into the socket.
5. Put the rubber cover back in place.