Volvo S90 - ACCESSORY PANEL, Дополнение к руководству пользователя

Страница: 119 / 166

PRACTICAL INFORMATION
}}
* Option/accessory. 117
CAUTION
Never touch the glass of bulbs with your fin-
gers. Grease and oils from your fingers vapor-
ize in the heat and will leave a deposit on the
reflector, which will damage it.
WARNING
•
The ignition should be switched off com-
pletely (be in ignition mode
0
) when
replacing bulbs.
•
If the engine has been running just prior
to replacing bulbs in the headlight hous-
ing, please keep in mind that components
in the engine compartment will be hot.
Before the halogen headlight bulbs can be
replaced, that plastic covering over the headlight
housing has to be removed and the housing has
to be lifted out of the vehicle.
–
Release the pins in the plastic covering's
four clips by pressing them down with a
screwdriver or similar object and remove the
covering.
NOTE
The pins in the clips have to be pressed back
completely before the clips are placed in the
plastic covering.
When the covering is put back in place, the
pins must be pressed so that their upper sur-
face is flush with the surface of the clip.
Front bulbs (vehicles with halogen
headlights)
Low beam
High beam
Parking light/Daytime Running Light
Turn signal
Fog light with corner illumination (LED)
*