Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 228 / 687

CLIMATE CONTROL
* Option/accessory. 226
Preconditioning
Preconditioning is a climate function that, if
possible, attempts to achieve a comfortable
temperature in the passenger compartment
before driving.
Preconditioning can be started immediately or
started at a preset time using a timer.
The function utilizes several of the vehicle's
systems:
•
In cold weather, the parking heater heats
the passenger compartment to a comfort-
able temperature.
•
In warm weather, air conditioning cools
the passenger compartment to a comfort-
able temperature.
•
The electrically heated steering wheel
*
and seats
*
can be activated.
•
Heating for the windshield, rear window
and door mirrors are automatically acti-
vated as needed.
During preconditioning in a hot climate, con-
densation from the air conditions may drip
under the vehicle. This is normal.
NOTE
Preconditioning is only available when the
car is connected to an electrical outlet. A
charging post that is not always active, for
example because of a timer, can cause loss
of function for preconditioning.
If the vehicle is not connected to an electri-
cal socket it is still possible in a warm cli-
mate to achieve brief cooling of the pas-
senger compartment by direct starting pre-
conditioning.
NOTE
During preconditioning of the passenger
compartment, the vehicle works to reach a
comfortable temperature and not the tem-
perature set in the climate system.
Related information
•
Parking climate (p. 225)
•
Starting and stopping preconditioning
(p. 226)
•
Preconditioning timer (p. 227)
Starting and stopping
preconditioning
Preconditioning heats or cools the passenger
compartment, if possible, before driving. The
function can be started in the center display
or from a cellular phone.
Starting and stopping from the vehicle
1. Tap the symbol in the center of the climate
bar to open Climate view in the center dis-
play.
2. Select the Parking climate tab.
3. Tap the boxes to select if seat/steering
wheel heating should be activated along
with preconditioning for each function.
4. Tap Preconditioning .
> Preconditioning starts/stops and the
button lights up/goes out.