Volvo S40 2006, Руководство пользователя

Страница: 218 / 230

2006 Volvo S40
Generator
1
maximum current 120/150 A
Starter motor output 1.4/1.9 kW
1. Dependent on engine type
pg. 182 Three-way catalytic converter
Three-way catalytic converter - general information
●
Keep your engine properly tuned. Certain engine malfunctions, particularly involving the electrical,
fuel or distributor ignition systems, may cause unusually high three-way catalytic converter
temperatures. Do not continue to operate your vehicle if you detect engine misfire, noticeable loss of
power or other unusual operating conditions, such as engine overheating or backfiring. A properly tuned
engine will help avoid malfunctions that could damage the three-way catalytic converter.
●
Do not park your vehicle over combustible materials, such as grass or leaves, which can come into
contact with the hot exhaust system and cause such materials to ignite under certain wind and weather
conditions.
●
Excessive starter cranking (in excess of one minute), or an intermittently firing or flooded engine can
cause three-way catalytic converter or exhaust system overheating.
●
Remember that tampering or unauthorized modifications to the engine, the Engine Control Module, or
the vehicle may be illegal and can cause three-way catalytic converter or exhaust system overheating.
This includes:
- Altering fuel injection settings or components.
- Altering emission system components or location or removing components.
- Repeated use of leaded fuel.
NOTE: Unleaded fuel is required for vehicles with three-way catalytic converters.
pg. 183 Volvo programs
Volvo On Call Roadside Assistance
Your new Volvo comes with a four year ON CALL roadside assistance. Additional information,
features, and benefits are described in a separate information package in your glove compartment. If you
have misplaced your package, dial:
In the U.S.A. 1-800-638-6586 (1-800-63-VOLVO)
In Canada: 1-800-263-0475
Technician certification
In addition to Volvo factory training, Volvo supports certification by the National Institute for
Automotive Service Excellence (A.S.E.). Certified technicians have demonstrated a high degree of
competence in specific areas. Besides passing exams, each technician must also have worked in the field
file:///K|/ownersdocs/2006/2006_S40/06s40_12a.htm (7 of 9)12/30/2006 4:46:28 PM