2005 Volvo S40
Manual station search
There are two ways to manually tune a radio station:
●
Turn the TUNING knob to obtain the desired frequency.
●
Press the left or right arrow key on the MENU NAVIGATION control and hold it down. The radio
scans slowly in the selected direction and will increase the scanning speed after a few seconds. Release
the button when the desired frequency appears in the display. The frequency can be fine-tuned by short
presses on the left/right arrow keys.
Storing stations
To store a selected station under one of the station setting buttons 0-9:
1. Tune to the desired station.
2. Press the button under which the station is to be stored and keep it depressed. The audio system sound
will be interrupted for a few seconds and STATION STORED will appear in the display. The station is
now stored.
A total of 30 stations can be stored; 10 stations each in AM, FM1 and FM2.
Storing stations automatically - AUTOSTORE
This function automatically searches for and stores up to ten strong AM or FM stations in a separate
memory. If more than ten stations are found, the ten strongest ones are stored. This function is especially
useful in areas in which you are not familiar with radio stations or their frequencies.
To use the AUTO function:
1. Select radio mode using the AM/FM button.
2. Start the search by pressing AUTO for more than 2 seconds.
3. AUTO STORING appears in the display and a number of stations with strong signals (max. 10) from
the selected frequency band will be stored in the auto-store memory. If there are no stations with
sufficient signal strength, NO AST FOUND is displayed.
The stored stations can be found using the buttons 0-9.
When the radio is in auto-store mode, AUTO is shown in the display. AUTO disappears when you
return to the normal radio mode. Return to the normal radio mode by pressing the AM/FM button,
EXIT, or by briefly pressing the AUTO button (for less than approx. 0.5 seconds).
To return to the Auto-store mode, press the AUTO button briefly and select a stored station by pressing
one of the number keys (0-9)
Scanning - SCAN
This function automatically searches for the next strong AM or FM station signal. When the radio finds
a station, scanning is interrupted for approximately 8 seconds, after which it will continue scanning.
pg. 175 Radio functions
1. Select radio mode using the AM/FM button.
2. Press SCAN (SCAN is shown in the display).
3. Press the SCAN or EXIT button to stop the scan function and listen to the selected station.
http://new.volvocars.com/ownersdocs/2005/2005_S40/05s40_11a.htm (8 of 18)8/12/07 12:20 AM