Volvo S 90, Руководство пользователя

Страница: 99 / 548

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction. 97
3. Scroll to the selection buttons in the lines
below TA and select the trip odometer to be
displayed.
•
Current fuel consumption
•
Distance to empty
•
Odometer
•
Trip odometers TM, TA or none
•
Tourist (alternative speedometer).
Select or deselect an alternative using the
center button (4). The change will be made
immediately.
Resetting a trip odometer
Reset trip odometer TM by pressing and holding
the
RESET
button the left-side steering wheel
lever. Trip odometer TA resets automatically if the
ignition is switched off for more than 4 hours.
Changing the unit of measure
Change the units of measure for driven distance
and fuel consumption in the center display's Top
view by selecting
Settings System Units
and marking the desired unit.
NOTE
Changing these units of measure will also
change the ones used in the Volvo navigation
system
*
.
Related information
•
Displaying trip statistics (p. 97)
•
Trip computer (p. 95)
Displaying trip statistics
Trip computer statistics can be displayed graphi-
cally in the center display.
Open the
Driver performance
app in the app menu to display
trip statistics.
Each bar in the graph repre-
sents a driving distance of
1 mile, 10 miles or 100 miles
1
depending on the current scale; bars are added
from the right and the bar at the far right shows
the value for the current trip.
Average fuel consumption is calculated from the
most recent time at which the current trip odom-
eter was reset.
Trip statistic settings
Select
Preferences
to:
•
change the graph's scale
•
Reset data after each trip (this occurs if the
vehicle remains parked for more than 4
hours)
•
Reset data for the current trip
1 This can also be displayed in kilometers.