Volvo D13F, Руководство оператора

Страница: 14 / 20

8 Volvo Engines
Operation
The Smart switch is used to interact with
the exhaust aftertreatment system DPF. The
switch is located on the left side of the
instrument panel.
W2006564
Regeneration
CAUTION
During the regeneration process, the
temperature of the exhaust will be
elevated. DO NOT park the vehicle with
the exhaust outlet under low hanging
overhead flammable objects such as trees,
awnings, etc. that could be damaged by
elevated exhaust temperatures.
CAUTION
If the vehicle is in a location that may be
hazardous when regeneration begins (i.e.,
in close proximity to flammable materials
or gases, inside tunnels, parked under
flammable objects, etc.), the regeneration
should be stopped. If regeneration is
stopped by the vehicle operator, it should
be initiated at a later time when the vehicle
is in a safer location. Regenerations
that are stopped and never restarted at a
later time, however, will require that the
vehicle be taken to an authorized Prevost
dealer to have the regeneration manually
started.
Note: If regeneration occurs during vehicle
operation, idle speed may increase when
the vehicle is stopped at a traffic light to
maintain proper regeneration conditions.
There are two types of regeneration:
at-speed automatic and parked. Automatic
regeneration only occurs when the vehicle
is moving at uninterrupted highway speed.
Parked regeneration is manually initiated
when the vehicle is stationary. This is the
standard configuration. Other configurations
are available.
The aftertreatment system is self-monitoring.
When the diesel particulate filter is
becoming full and regeneration is needed,
the DPF Regeneration Required icon on
the Smart switch illuminates. Maintain
uninterrupted highway speed for an
automatic regeneration. To delay the
regeneration process, if necessary, press the
bottom of the Smart switch. Initiate a parked
regeneration at the next stop.