Service Information
Document Title:
Function Group:
Information Type:
Date:
Engine and transmission,
removing
210
Service Information
2014/8/27
Profile:
ART, A35E FS [GB]
Engine and transmission, removing
Op nbr 210-073
88830051 Lifting tool
This operation also includes required tools and times for applicable parts of the following operations:
173 Coolant, change
900 Vacuum pump, connection
WARNING
Changing control units between machines, when troubleshooting or repairing, may not take place for any reason
without reprogramming.
Incorrect individual settings in the control unit may result in personal injury or machine damage.
For reprogramming and read-out of software, see "VCADS Pro User manual".
1. Place the machine in service position.
2. Turn off the electric power with the battery disconnect switch.
NOTE!
If the height between the workshop floor and the overhead crane member is less than 450 cm (15 ft), the engine
hood shall be removed. If higher, the engine unit can be lifted out with the engine hood left on the machine.
See:
821 Engine hood, removing
3. Remove the front and rear underbody skid plates.
Figure 1
Underbody skid plates
Содержание D12D
Страница 2: ...Figure 2 Engine identification D12D ...
Страница 6: ...Figure 2 Certification decal ...
