8
D7600188
Insert the new anti-roll bar from the side and over the exhaust
pipe. At the same time, turn the anti-roll bar to get it into position
Press the mountings (1) for the anti-roll bar up against the base
plate mountings. Use the mobile jack.
Install:
new screws (2) and nuts (2). Tighten to 80 Nm (60 lbf.ft.). See
point
the mountings for the handbrake cables (3). Tighten the
mountings
the mountings (4) for the centre silencer.
9
Reinstall:
the outer end of the anti-roll bar on the lower ball joint bolt for the
control arm. See point
the nut. Tighten to 80 Nm (60 lbf.ft.). Use socket (P/N 9995500)
and a Torx socket as a counterhold.
10
E6500370
Install the new upper shock absorber bearing in the spring turret.
Use the three screws from the kit and the two washers. Do not
tighten fully yet.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Lowered sports chassis- 8670993 - V1.0
Page 9 / 18