64
IMG-346141
Take the cable harness (F) out of the kit and place it on the left
hand side of the tunnel console.
Connect the 12V cable to the female connector on the cable
harness.
Insert the remaining male connector through the hole to where
the cup holder was.
Pull the cable forward inside the carpet for the centre console.
65
IMG-347546
Cut off the foam, remove the protective tape and wind the foam
around the connector and fuse holder.
66
IMG-340946
Place the foam covered components as illustrated. Ensure that
the cables do not come into contact with sharp edges.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 31330111 - V1.3
Page 29 / 41