23
IMG-346091
Make the holes in the bumper cover using the hole tool.
Screw the hole tool together until it has cut the hole in the
bumper cover.
Remove the plastic pieces from the hole tool and make the
remaining holes in the same way.
Caution!
Place the hole tool's support sleeve on the inside, and the
cutting part on the outside of the bumper casing.
24
IMG-346092
Clean the inside of the bumper cover using a mild soap solution.
Clean an area around the holes that is slightly larger than the
sensor cradle. Use: Isopropanol.
Allow to dry.
25
IMG-346093
Clean the cradles on the surfaces as illustrated. Use:
Isopropanol.
Allow to dry.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, rear- 31330676 - V1.4
Page 12 / 23