11
M8902044
The front weatherstrip (1) is bonded and is not detachable. The
weatherstrip must be masked when spraying.
Caution!
When painting the space box
The box is made from glass-fibre reinforced polyester with a
gel coated surface. During painting, the box must be handled
according to the instructions for these materials. The
temperature must not exceed 50°C when painting. Also see
the paint supplier instructions.
Assembling the space box after painting
12
M8902045
Assembling the space box after painting
Reinstall the lock and lock protection with the text "ASSA" turned
the right way round in the locked position
Reinstall the lock guide and the nut. Do not tighten yet
Install the upper section. Reinstall the plate for the hinge.
Tighten to 4 Nm (3 lbf. ft.)
Laterally align the space box using the lock guide so that the
lock is positioned in the centre of the upper section of the cut out
Tighten the nut for the lock guide. Tighten to a maximum of
4 Nm (3 lbf. ft.)
Press the gas struts onto the joint bolts
Reinstall the lock hook, the nut and the lock facing. Finger
tighten.
Note!
Use a screwdriver as a counterhold for the lock hook when
tightening the nut to prevent damage to the lock cylinder stop.
Reinstall the lock protection cover with the strap under the
flange for the cover
Adjust the length of the strap to prevent full opening. The centre
opening must be approximately 540-550 mm (21 1/4" - 21
11/16").
Note!
Lock the load strap. First pull backwards and through the
eyelet on the strap lock.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Space box- 30664082 - V1.0
Side 10 / 10
