6D
IMG-231683
7
IMG-231685
Install the front engine block heater socket with the guide pin in
the large hole.
Route the cable in so that it runs down on the inside of the left-
hand bracket for the skid plate.
Align the front engine block heater socket so that the long sides
of the mounting plate are parallel with the edges of the surface
into which the mounting plate shall be screwed.
Mark out for drilling the hole for the screw for the mounting plate.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine block heater, 110V, 6-cyl- 30661683 - V1.2
Page 8 / 18
