2003 VOLVO XC90
Changing a wheel
There are two attachment points for the jack on each side of the vehicle. These attachment points are
under the center of each door.The jack is located in the storage compartment under the cargo area floor
(to the right in five-seat models and in the center in seven-seat models), and the crank is stored in the
tool bag.
WARNING!
- There is an attachment point on each side of the vehicle located under the pillars between the front
and rear doors. This point is used during the production process only, and is NOT intended for
attaching the jack.
-The undersides of accessory running boards are not intended for attaching the jack.
To change a wheel:
1. Park the vehicle on a firm, level, nonslippery surface.
2. Engage the parking brake and put the gear selector in the Park position.
3. Loosen the wheel bolts by exerting downward pressure on the lug wrench.
4. Remove the wheel cap (where applicable) using the lug wrench in the tool kit.
5. With the wheels still on the ground, use the lug wrench to loosen the wheel bolts 1/2 - 1 turn. Turn the
bolts counterclockwise to loosen the bolts.
file:///K|/ownersdocs/2003/2003_XC90/03xc90_08.htm (10 of 12)12/30/2006 4:19:01 PM
Содержание 2003 XC90
Страница 169: ...2003 VOLVO XC90 pg 135 Maintenance file K ownersdocs 2003 2003_XC90 03xc90_09b htm 2 of 23 12 30 2006 4 19 04 PM...
Страница 190: ...2003 VOLVO XC90 18 Contents Top of Page file K ownersdocs 2003 2003_XC90 03xc90_09b htm 23 of 23 12 30 2006 4 19 04 PM...
Страница 217: ...2003 VOLVO XC90 Contents Top of Page file K ownersdocs 2003 2003_XC90 03xc90_11a htm 17 of 17 12 30 2006 4 19 06 PM...
Страница 242: ...2003 VOLVO XC90 Contents Top of Page file K ownersdocs 2003 2003_XC90 03xc90_12 htm 14 of 14 12 30 2006 4 19 09 PM...