2003 VOLVO XC70
Attaching the jack
NOTE: To avoid excessive wear and the necessity of rebalancing, mark and reinstall wheels in the same
location and position as before removal. To lessen the chance of imbalance, each wheel hub is equipped
with a guide stud to ensure that a removed wheel can be reinstalled in its original position (as when
changing over to winter tires/wheels).
NOTE: Refer to
page 133
for hoisting the vehicle on a garage lift.
Jack for AWD models
CAUTION:
●
The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
●
Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased
or lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it
impossible to fit the hub caps.
file:///K|/ownersdocs/2003/2003_XC70/03xc70_07.htm (9 of 10)12/30/2006 4:18:01 PM
