1987 Volvo 760
When the primer surface is dry, the paint can be applied using a brush.
Mix the paint thoroughly; apply several thin paint coats and let dry after each application.
pg. 94 Paint touch-up
3 If there is a longer scratch, you may want to protect surrounding paint by masking it off.
Touching up damaged paint on fender edges and sills
Material:
Rust remover
Primer - spray
Surface finish - spray
Sand paper (H 150-300 grit)
Thinner
NOTE! When touching up the car, it should be well cleaned and dry and have a temperature exceeding
60°F (+15°C).
Mask with tape and paper prior to painting larger surfaces. Remove the masking immediately after
application of the last paint coat, before the paint starts to dry.
Touching up is as follows:
1 Remove paint flakes.
2 Sand the damaged surface and wash it clean with thinner.
Apply the rust remover. (Avoid contact with skin!) Wait a few minutes and then rinse carefully with
water and wipe dry.
file:///K|/ownersdocs/1987/1987_760/87760_06.htm (6 of 9)12/30/2006 7:55:34 AM