Volvo Penta 8400, Руководство пользователя

Страница: 39 / 108

Viewing a List of Routes and Auto Guidance Paths
1
Select Info > User Data > Routes .
2 If necessary, select Filter to see routes only or Auto
Guidance paths only.
3 Select Sort to sort the list of available routes by range,
length, or name.
Editing a Saved Route
You can change the name of a route or change the turns
the route contains.
1 Select Info > User Data > Routes .
2 Select a route.
3 Select Review > Edit Route .
4 Select an option:
• To change the name, select
Name , and enter the
name.
• To edit a turn from a list, select Edit Turns > Use
Turn List , and select a turn from the list.
• To select a turn using the chart, select Edit Turns >
Use Chart , and select a location on the chart.
Modifying a turn that uses a saved waypoint does not
move that waypoint, it relocates the turn in the route.
Moving the location of a waypoint used in a route does
not move the turn in the route.
Finding and Navigating a Saved Route
Before you can browse a list of routes and navigate to
one of them, you must create and save at least one route
(
Creating and Saving a Route , page 28 ).
1 Select Info > User Data > Routes .
2 Select a route.
3 Select Navigate To .
4 Select an option:
• To navigate the route from the starting point used
when the route was created, select Forward .
• To navigate the route from the destination point
used when the route was created, select Backward .
• To navigate parallel to the route, select Offset
( Browsing for and Navigating Parallel to a Saved
Route , page 29 ).
• To navigate a route from the route's first waypoint,
select From Start .
A magenta line appears. In the center of the magenta
line is a thinner purple line that represents the
corrected course from your present location to the
destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
5 Review the course indicated by the magenta line.
6 Follow the magenta line along each leg in the route,
steering to avoid land, shallow water, and other
obstacles.
7 If you are off course, follow the purple line (corrected
course) to go to your destination, or steer back to the
magenta line (direct course).
Browsing for and Navigating Parallel to a Saved Route
Before you can browse a list of routes and navigate to
one of them, you must create and save at least one route
(
Creating and Saving a Route , page 28 ).
1 Select Info > User Data > Routes .
NOTE: Auto Guidance is available with premium
charts, in some areas.
2 Select a route.
3 Select Navigate To .
4 Select Offset to navigate parallel to the route.
5 Select Offset to enter the distance to offset from the
route.
6 Indicate how to navigate the route:
• To navigate the route from the starting point used
when the route was created, to the left of the original
route, select
Forward - Port .
• To navigate the route from the starting point used
when the route was created, to the right of the
original route, select
Forward - Starboard .
• To navigate the route from the destination point
used when the route was created, to the left of the
original route, select
Backward - Port .
• To navigate the route from the destination point
used when the route was created, to the right of the
original route, select
Backward - Starboard .
7 If necessary, select Done .
A magenta line appears. In the center of the magenta
line is a thinner purple line that represents the
corrected course from your present location to the
destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
8 Review the course indicated by the magenta line.
9 Follow the magenta line along each leg in the route,
steering to avoid land, shallow water, and other
obstacles.
10 If you are off course, follow the purple line (corrected
course) to go to your destination, or steer back to the
magenta line (direct course).
Initiating a Search Pattern
You can initiate a search pattern to search an area.
Different patterns are better suited for different search
situations.
1 Select Info > User Data > Routes > New > Route
Using SAR Pattern .
2 Select a pattern:
• Select
Sector Search when the location of the
object is fairly known, the search area is small, and
an intensive search is needed.
• Select Expanding Square when the location of the
object is somewhat doubtful, the search area is
small, and an intensive search is needed.
• Select Creeping/Parallel Line when the location of
the object is approximate, the search area is small,
and a consistent search is needed.
Navigation with a Chartplotter 29