Do not apply throttle when dismounted.
Starting up the scooter
Turn the ignition key clockwise by 1 "Click"
Press and hold on the Multi - Function Display (MFD)
Once the MFD is powered on, the scooter is ready to go
1.
2.
3.
It is best practice to switch the scooter off when parked and not in use.
MFD Unit
Riding
Pre - Ride Checks
Check Tyre Pressures (50PSI)
Ensure all bolts and screws are tight
Ensure Chain drive system is properly lubricated, adjusted and clean.
1.
2.
3.
Headlights
Press the green headlight button to turn on
1.
Rogue 1200 & Rogue 2000
The headlight(s) have 3 modes that
can be cycled through by switching
the light on and off:
Mode 1: High Beam - Full Brightness
Mode 2: Low Beam - Half Brightness
Mode 3: Strobe - Flashing
Rogue 1600
The headlight has a single operation
mode.
Horn
Press red horn button to activate
1.
Ride Modes
Limits top speed of scooter to
25km/h (Can be adjusted in P-
settings)
Reduces performance of scooter
Eco Mode
Unrestricted performance.
High Mode
The ride modes are changed on the MFD by pressing the "M" Button
Press the "M" button
to toggle between
ECO and HIGH mode.