7
Press “UP” button again to turn “MOTION DETECTION OFF”.
Note: Motion detection mode will be on when every time power is switched on. This is
VS2100 internal default.
1. When “motion detect” is ON, it will enter “self-learning mode” (the upper-left icon will
keeping flashing) automatically for about 60 seconds until it stops. The “self-learning mode”
means the software will learn the current camera status to minimize false triggering. VS2100
will enter “self-learning mode” every time when you turn “MOTION DETECTION ON”
2. Don’t walk through the detection area when in “self-learning mode” because it will lower the
detection sensitivity. When it triggers, the icon will become green and record a picture (.jpg
format) /video (.avi format).
3. Make sure to be at picture 1 or picture 2 monitoring when “motion detection” is ON. Only the
selected channel can be recorded. This unit can only record one channel. Do not program
“motion detection” in “picture in picture” status.
4. In order to prevent and avoid false triggers, we recommend:
i)
Do not aim camera at the sun
ii)
Aim away from constant moving objects
iii)
Avoid mirror and reflected light from bright surfaces
iv)
Avoid areas which have shadow variation
5. When aiming the camera, bright areas will be more sensitive than dark areas.
6. When memory is full, the icon that is next to “MOTION DETECTION ON” icon will become
RED in colour and the memory will overlap.
7. The pictures stored in the SD card can’t be displayed on general digital cameras.
Note: Please always restart the recorder when system malfunctions or crashes.
Play mode
：
1. Auto single- picture review:
Press “PLAY” button to review captured images or videos. Press “RIGHT or LEFT” button
once will enter “Slide show” program to forward or reverse the pictures automatically. Press
button again to stop and stay at the picture you want to review. Press “RIGHT or LEFT” again
will continue the “Slide show” program. In single-picture review page, press “PLAY” again to
show 6 pictures at the same time. Press it again to show folders by date; and press it again to
back to the selected channel.
NOTE: The time and date stamping can be hidden when press “UP arrow” button in
single-picture review mode. Press it again to show the time and date.
2. Six-picture review:
When VS2100 is in single photo review page, press “PLAY” to enter six-picture review page.
Use “UP, DOWN, RIGHT and LEFT” button to select the picture you wish to review and then
press “OK” to open it. Press “PLAY” again to return to six-picture review page.
3. File folders review:
When VS2100 is in six-photo review page, press “PLAY” button to enter file folders review