CONNECTION METHORD 2 CONNECTING TO A VCR
Receiver
DIP switches
SETTING THE DIP SWITCHES
When you receive the receiver, the DIP switch on the rear will have one channel
set in the down position. This represents Channel 1, enabling you to use the
system with one camera. Refer to page 6 of the instructions for location of the DIP
switch.The white part in the diagram represents the switch.
USING ONE CAMERA
Camera
DIP switches
The switch is in
the ON position
when it is in the
down position
The Receiver connection is now complete
.
NO TUNING is required, simply select the Video Channel on your TV and the AV
channel on your VCR to view the camera picture. If your not sure how to select the
AV channel on your VCR you will need to look up selecting the AV channel in your
VCR installation instructions.
Page 2
If adding additional cameras to your system you will need to change the DIP
switch to reflect the number of cameras being used.
USING TWO CAMERAS
To use two cameras, two channels need to be selected on the DIP switch. The
first two channels switches should be in the down position.
Page 5
You can connect a VCR and a CT220 VCR Controller to the CRS200 receiver
allowing you to record the camera picture in the event of an alarm.
Connect the AV cables and CT220 VCR Controller (Not supplied) as shown below.
CONNECTING A CT220 VCR Controller
This product has a twelve month manufacturers parts and labour warranty. In the
unlikely event that you encounter a problem with this product, please telephone the
Voltek helpline on 09066 191 133*. Should the problem not be able to be resolved
over the telephone it should be returned to the place of purchase or direct to Voltek
WARRANTY
*Helpline calls cost 60p/minute. Open 9am to 5pm, Mon to Fri.
IN OUT
12V DC
A OUT V
12V DC
BEEP
SELECT
VCA
Scart to Phono
Lead
CRS200 Receiver
SCART SOCKET
Scart to Phono
Adaptor
Video Recorder
VCA
Link Lead
CT220
VCR Controller