Voltech AT5600, Руководство пользователя

Страница: 261 / 438

C H A P T E R 1 3 – T E S T F I X T U R E S
AT5600 User Manual 98-119 issue 14
Page 261
Connection Types:
•
Surface mount.
•
Pin connection.
•
Blade connection.
•
Flying leads
Pitches of:
•
1.27 mm
•
1.96 mm ( 0.156”)
•
2.00 mm
•
2.50 mm
•
2.54 mm (0.1”)
•
3.81 mm (0.15”)
Also, though a 1.27 mm pitch is available it is only anticipated that component
connections will be on multiples of this pitch and there will not be two connections
only 1.27 mm apart.
13.2.2. Compatible connection types
•
Kelvin clips
•
Kelvin blades (Automech type)
•
4mm sockets
•
ATE pins (Rotary point, Castellated, Point, Cup, Crown)
A list of known suitable ATE pin types is shown in the fixture system user manual.
13.3. The Voltech 40 Socket Fixture
A fixture board fitted with 40 - 4mm sockets, 20 red (power) and 20 black (sense).
The sockets are wired to the 40 contacts which align with the tester's 40 nodes.
This fixture may be used for convenient wiring to existing fixtures or as a means of
connecting flying leads and clips for use in developing test programs or testing
parts in a design laboratory.