Voltech AT5600, Руководство пользователя

Страница: 256 / 438

C H A P T E R 1 2 – W A R R A N T Y A N D S E R V I C E
AT5600 User Manual 98-119 issue 14
Page 256
LIMITATION OF WARRANTY
The foregoing warranty shall not apply to defects resulting from unauthorized
modification or misuse, or operation outside specification of instrument. No other
warranty is expressed or implied.
Whilst every care has been taken in compiling the information in this publication
Voltech Instruments cannot accept legal liability for any inaccuracies contained
herein. Voltech Instruments has an intensive program of design and development
which may well alter product specification and reserve the right to alter
specification without notice and whenever necessary to ensure optimum
performance from its product range.
It shall be deemed to exclude all other warranties and conditions whether express
or implied and whether arising by common law statute or otherwise.
Voltech reserve the right to waive this benefit in any event where it is clear upon
inspection that the cause of the failure is due to customer misuse.
Voltech will be the sole arbiter in these circumstances.
Because software is inherently complex and may not be completely free of errors,
you are advised to verify your work. In no event, will Voltech be liable for direct,
indirect, special, incidental or consequential damages arising out of the use of or
inability to use software or documentation, even if advised of the possibility of
such damage. Voltech is not responsible for any lost profits or revenue, loss of
use of software, loss of data, cost of substitute software, claims by third parties, or
for other similar costs. In no case, shall Voltech's liability exceed the amount of
the license fee.
(Should this be purchase price )
Current Full terms of business can be viewed on Voltech’s website
(www.voltech.com) by selecting “Terms of Business’ at the bottom of the home
page
12.2. Service and Calibration
To confirm the accuracy of your product, a calibration check should be carried out
every 12 months.
Calibration adjustment is carried out using OEM equipment and software
systems. Adjustment can only be performed by an authorized Voltech service
center.
For details of calibration facilities and any other service request, please contact
your supplier. Voltech strongly recommends that you discuss your service
requirements with your supplier before service is needed. Extended warranty and
full-service agreements may be available.